May 25, 2026
case study - VR & 360° INTERACTIVE EXPERIENCE
SATOSHI
GLOBAL VILLAGE
A fully immersive 360° interactive world built for a 108 acre private island enclave on Rum Cay, Bahamas — accessible on any device, anywhere on Earth.
location
Rum Cay, Bahamas
scale
108 Acres
deliverable
360° Interactive Tour
Platforms
Web · Mobile · VR
the project
An Island Paradise, Digitized.
Satoshi Global Village is an extraordinary 108-acre private island enclave on Rum Cay in the pristine southern Bahamas — offering luxe suites, saltwater lagoon villas, oceanfront townhouses, sky bungalows, a world-class wellness center, a sail bar, and private air access.
The client needed to transport prospective buyers and investors directly into the heart of the island — before a single unit was built. SPINE was brought in to build the digital world.
108acPRIVATE ISLAND
6+DISTINCT ZONES
360°INTERACTIVE TOUR
master plan
The Island Master Plan
108 acres of pristine Bahamian coastline planned across six distinct zones — from a beachfront sail bar and saltwater lagoon villas to private estates, oceanfront townhomes, and a full-service hotel and wellness center.
the challenge
Selling a Vision Before Ground Was Broken
No physical sales center. No completed structures. No traditional photography. Only a masterplan, architectural drawings, and the profound natural beauty of a remote Bahamian island.
SPINE’s challenge: build a photorealistic digital world accurate enough to close sales, secure financing, and serve as a permanent marketing platform.
- 01Full photorealistic 3D environment across all six development zones
- 02360° interactive tour with real-time navigation island-wide
- 03Cross-platform: desktop web, mobile, and VR headset
- 04Animated ocean water dynamics and environmental lighting
- 05Navigation tutorial for first-time users
- 06Marketing-quality still renders for print and digital
our process
How SPINE Builds Worlds
Every SPINE project follows the same rigorous three-stage production pipeline — refined over two decades to ensure client alignment at every step before a single detail render is produced. Nothing surprises. Everything is approved.
01
STAGE ONE
Geometry & Camera Angle
A 3D model is created from submitted files. The Level 01 rendering is a schematic image produced to verify the accuracy of the 3D geometry and to select the camera angles that best showcase the project.
- 01CAD files: site plans, floor plans, roof plans, ceiling plans & elevations
- 02Detail drawings, reference images or existing 3D files
- 03Background and/or site photos
- 04Description of desired camera angle
LEVEL 01
LEVEL 02
02
STAGE TWO
Materials & Lighting
Once camera angles are approved, Level 02 production begins. All materials and lighting conditions are applied. Comments at this stage focus on material accuracy, colors, textures, and proper lighting conditions.
- 01All materials, colors and textures must be submitted
- 02Geometry and camera angle must be fully approved
- 03Lighting time of day selected: dusk, day, or night
- 04All background or context images submitted
03
STAGE THREE
Post Production Enhancement
The final and most rewarding stage. A complete representation of all materials, colors, textures and lighting is achieved. Post-production includes landscaping, entourage, lighting enhancements, color corrections, and cosmetic refinements.
- 01Approval on Level 02 including geometry and lighting
- 02Any additional accessories, cars, and entourage submitted
- 03Additional landscaping not included in CAD plans
- 04Comments typically limited at this stage — nearly complete
LEVEL 03
FINAL
FINAL
04
FINAL DELIVERY
Production-Ready Deliverables
Once the project is formally awarded, the assigned account manager schedules a kick-off meeting. All changes, updates, and progress samples are tracked in real time — keeping every stakeholder aligned throughout production.
- 01High-resolution stills at final quality for print and digital
- 02360° interactive tour for web, mobile, and VR
- 03Animated sequences and VR walkthrough recordings
- 04All project updates tracked through Basecamp
OUR PROCESS
It is vital for the success of your project that our team accurately understands your objectives, comments, and ideas. For this reason
the SPINE team have molded and refined our process over the years into 3 simple phases of production
- Level 1. Geometry and Camera Angle
- Level 2. Materials and Lighting
- Level 3. Post Production Enhancement
LEVEL 01
Geometry and Camera Angle – A 3D model will be created once the files mentioned below are submitted. A level 01 rendering is a simple schematic image produced only for the purpose of reviewing the accuracy of the 3D geometry of the building, space or object according to the information we were provided as well as selecting the camera angles which you feel best showcase your project.
Preferred files to produce level 1:
CAD Files Site plans, Floor plans, Roof plans, Reflective ceiling plans, Elevations.
Any other detail drawings, images or 3D files
Background and/or site photos.
Description of camera angle.
Preferred files to produce level 1:
CAD Files Site plans, Floor plans, Roof plans, Reflective ceiling plans, Elevations.
Any other detail drawings, images or 3D files
Background and/or site photos.
Description of camera angle.
LEVEL 02
Materials and Lighting – After the camera angles are chosen and approved, the production of a level 2 rendering is started. During this level of production materials and lighting conditions will be applied. When reviewing a level 2 sample your comments should be focused on the accuracy of the materials, colors, textures, and proper lighting conditions. By this stage all geometric discrepancies should have already been addressed. This level typically requires the most attention and time out of all the levels of the rendering process in order to produce the foundation of a high quality, photorealistic rendering. Your patience and cooperation will be imperative and appreciated.
Prerequisites for level 2:
All materials, colors and textures should have been submitted by this stage.
Geometry and camera angle should already be approved. Type of lighting dusk, day, night should have been selected.
All background or context images need to have been submitted
Prerequisites for level 2:
All materials, colors and textures should have been submitted by this stage.
Geometry and camera angle should already be approved. Type of lighting dusk, day, night should have been selected.
All background or context images need to have been submitted
LEVEL 03
Post Production Enhancements – This is the final and most rewarding stage of the rendering process. Once a level 3 rendering has been reached we should have achieved an adequate representation of all materials, colors, textures and lighting conditions. At this stage all post-productions work will begin. Post-production work includes but are not limited to the addition of landscaping, people, accessories and after effects such as lighting enhancements, color corrections and cosmetic alterations. After a level 3 rendering is submitted, the comments are typically limited any of the enhancements added during this phase of production.
After all of this work is completed an image will be delivered at final high resolution.
Prerequisites for level 3:
Approval on level 2 sample, including geometry and lighting approval Submission of any additional accessories, cars and entourage Additional comments on landscaping not included in CAD plans or previously mentioned
After all of this work is completed an image will be delivered at final high resolution.
Prerequisites for level 3:
Approval on level 2 sample, including geometry and lighting approval Submission of any additional accessories, cars and entourage Additional comments on landscaping not included in CAD plans or previously mentioned
LEVEL 04
the process
From Blueprint
to Breathtaking
Every space built through SPINE’s structured L1 → L2 → L3 → Final pipeline. Drag the slider left/right to reveal the raw block-out versus the finished photorealistic render.
Private residences from beachfront estates to sky bungalows — the dramatic L1 to final transformation of light, material, and landscape.
L1-BLOCK-OUT
L2-MATERIALS
L3-DETAIL
FINAL RENDER
the experience
The 360° Interactive Tour
Navigate freely through every zone of Satoshi Global Village in real time. Click any destination to teleport, or walk through the island at your own pace — on any device.
Play Video
EXPLORE 360 PANO EXPERIENCE
in motion
The World
In Motion
From animated ocean water dynamics to fully navigable VR walkthroughs — the Satoshi world was built to be experienced, not just seen.
the work
Explore the
Island
Every zone rendered in photorealistic detail. Navigate with arrows or select a thumbnail.
THE RESULT
Experience the
Island Anywhere
The finished 360° interactive world lets buyers, investors, and partners explore Satoshi Global Village in photorealistic detail — on any device, at any time, from anywhere on Earth.
SPINE transported our vision into a living, breathing world that buyers could step inside from anywhere on Earth. The result wasn’t just a marketing tool — it was the island itself.
3D Rendering
Photorealistic stills for print, web, and sales.
VR Experiences
Fully immersive Unreal Engine environments.
360° Panoramas
Interactive tours on web, mobile, and VR.
3D Animation
Cinematic fly-throughs and product animations.
Product Visualization
Studio-quality renders and experiences.
VFX / Post Production
Video compositing and visual effects.
